Installation Guide

Simple Image Quality Adjustment Tool 2-1
Installation and Adjustments Guide
2 SIQA Software Installation
Important
The SIQA software must be installed before the Auto Alignment Adjustment and Density
Uniformity Adjustment procedures can be performed.
The SIQA software installation process consists of the following:
• Installing the SIQA software on a PC
• Setting up communication between the SIQA software application and the print engine
This varies depending on the print server attached to your machine and whether or not a
third-party PC is being used. For more information, refer to Setting Up Communication
between the SIQA Application and the Print Engine on page 2-8.
System Requirements
The following requirements must be met before installing the SIQA software:
• A client PC with one of the following supported operating systems: Windows
®
Vista SP2,
Windows
®
7 SP1, or Windows
®
8.1
The SIQA software must be installed on a separate Windows-based PC for the following:
– Xerox
®
standalone printer
– Xerox
®
EX Print Server, powered by Fiery
®
(standalone)
– Integrated Fiery
®
Color Server
• SIQA software media
– The SIQA software either on a USB drive or a DVD
– The SIQA Black Page PDF files, which reside either on the USB drive or the DVD
Note
The Power Save Mode timer should be set to a minimum of 60 minutes so the machine will
not enter Sleep Mode during this procedure.