Installation Guide

Auto Alignment Adjustment
Simple Image Quality Adjustment Tool 5-7
Installation and Adjustments Guide
11. Select the paper tray for which you want to perform the alignment adjustment, and then
select Save.
12. Select a number between 1 and 10 for image area coverage for a typical print job for side 1
and side 2. (Refer to the table below to help you choose appropriate coverage values.)
Note
Area coverage can be one of the factors that changes the alignment. To adjust a specific
area coverage level, set a value from 1 to 10. Set higher values for heavier area coverage.
However, for most cases setting the value to 1 is adequate. You can also select different
settings for side 1 and side 2 if the area coverage is heavier on one side than the other.
Coverage
Value
Area Coverage Reference
1 Low Area Coverage – text only
5 Medium Area Coverage – equal mixture of text and graphic images
10 High Area Coverage – entire page is primarily graphic images