Installation Guide

Auto Alignment Adjustment
Simple Image Quality Adjustment Tool 5-9
Installation and Adjustments Guide
The sample sheet prints. In the example below the coverage value was set to 1 for both
sides.
Auto Alignment Adjustment Test Print Side A Auto Alignment Adjustment Test Print Side B
One black square One gray square
Two black squares Two gray squares
15. To correct the misalignment, scan each of the four sides of sample chart, lead edge and trail
edge for each front and back side. Follow the instructions on the Auto Alignment
Adjustment screen.
Note
You may scan the sides of the sample sheet in any order.
a. Place the sample print onto the document glass (shown in step 1 on the image below).
Side 1 of black paper
(Refer to p. 2-7 for printing instructions.)