Installation Guide

SIQA Software Installation
2-16 Simple Image Quality Adjustment Tool
Installation and Adjustments Guide
Setting Up and Running SIQA Software on a PC when a
FreeFlow Print Server is Installed
1. Ensure that the hub is installed and that the three Ethernet cables are connected to the
following:
– One cable from the wall drop to the hub
– One cable from the hub to the FreeFlow Print Server
– One cable from the hub to the print engine
2. At the print engine UI record the machine’s IP address by selecting Machine Status >
Machine Information.
3. From the PC desktop, double-click the SIQA icon.
The Input_Communication_Parameters window displays.
4. Enter the printer IP address and select OK.
5. If necessary, enter admin as the key operator ID, and then select OK.