Installation Guide

SIQA Software Installation
2-14 Simple Image Quality Adjustment Tool
Installation and Adjustments Guide
5. If necessary, enter admin as the key operator ID, and then select OK.
The window below displays indicating that the connection between the SIQA Tool and the
machine was successful and that a folder has been created on the print engine hard drive.
Note
To confirm the folder creation, go to the printer and select Send from Folder on the home
screen and select <folder 190>. The newly-created folder name is SYSTEM-IQ-AUTO. If
the folder does not exist in Send from Folder, repeat steps 3 through 5 above.
Note
If the Tool displays the message: “Failed to communicate with the machine. Do you want to
try again?” click No and follow the instructions in If the Connection Between SIQA and the
Machine is Unsuccessful on page 8-1.