Manual

Z Fold Half Sheet Position Adjustment
Adjust the A fold position.
1. Select Z Fold Half Sheet- A3, Z Fold Half Sheet- B4, Z Fold Half Sheet-11x17”, or
Z Fold Half Sheet - 8K, and press Change Settings.
2. Press Sample Printout.
3. Select the tray and press the Start button.
4. Press Save.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in the previous step in Values A.
Note
Set value B so that an edge of the paper does not extend past a fold position of the
paper. An edge of paper extending past a fold position of the paper may cause a
paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment
results.
8. Make adjustments again if necessary (Step 6).
9. Press Save.
Xerox
®
Color 550/560/570 Printer8-6
System Administrator Guide
Image Registration Setups