Manual

11. Press Sample Printout again to print an output sample, and check the adjustment
results.
12. Make adjustments again if necessary. (Steps 7 - 10)
13. Press Save.
C Fold Position Adjustment
Adjust the C fold position.
1. Select C Fold-A4 or C Fold-8.5x11”, and press Change Settings.
2. Press Sample Printout.
3. Select the tray and press the Start button.
4. Press Close.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in Step 5 in Values A
Tip: Set value A and value B so that an edge of the paper does not extend past a
fold position of the paper. An edge of paper extending past a fold position of the
paper may cause a paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment
results.
8. Make adjustments again if necessary. (Step 6)
9. Press Save.
Z Fold Position Adjustment
Adjust the Z fold position.
1. Select Z Fold-A4 or Z Fold-8.5x11, and press Change Settings.
2. Press Sample Printout.
3. Select the tray and press the Start button.
4. Press Save.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in the previous step in Values A.
Note
Set value A and value B so that an edge of the paper does not extend past a fold
position of the paper. An edge of paper extending past a fold position of the paper
may cause a paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment
results.
8. Make adjustments again if necessary (Step 6).
9. Press Save.
8-5Xerox
®
Color 550/560/570 Printer
System Administrator Guide
Image Registration Setups