User guide
May 2003 604E02400 7
EXERCISE 5 - The Document Glass
OBJECTIVE: Demonstrate how to place originals and programme copies when using the Document Glass.
1. Raise the Document Glass cover.
2. Place the first page of the Getting to Know Your WorkCentre Pro/CopyCentre package face down and
flush against the upper left corner of the Document Glass. LEF against the left side of the glass. Close
the cover.
3. Under Paper Supply on the Touch Screen Select Tray 1.
4. Under 2 sided Copy Select 1-1 sided output.
5. Under Reduce/Enlarge select 100%.
6. Select 2 copies on the keypad.
7. Press the Start Button.
8. The Job Monitor window will pop-up after you press Start. This will show the status of the job you just
started. You can select Programme Next Job to close the window or wait until the job is completed
when it will close automatically.
9. Check the copy quality. Save these copies for use in the next copy job.
10. Remove the original from the Document Glass and lower the Cover.
11. Press Clear All.
RESULT: 2 copies delivered to the output tray.
Registration
Corner
Document Glass
Cover
Original against the
glass