User guide

May 2003 604E02400 3
EXERCISE 1 - Power Switch Locations
Preferred Power Switch procedure
1. The Power switch is located on the right side of the machine. When the switch is pressed towards the
rear of the machine, the power is turned on. When the switch is pressed towards the front of the
machine, the power is turned off. This is the preferred power off/on procedure.
2. When powering off the machine, pop-up screens will appear asking you to select either power-off or
power-saver mode. Press your selection. There may be a short delay if a copy job or adjustment are in
process. If there are jobs in the queue, a second User Interface (UI) confirmation screen will appear,
warning that jobs will be lost if the power off confirmation is selected.
3. When the machine is in the Power Saver Mode, the User Interface Green Power Saver light is on and
the power switch is disabled. Press any button or touch the screen to activate the power-off switch and
then press it towards the front of the machine to turn off power.
Secondary procedure
The red button located inside the machine is a secondary option to power off the machine. Pressing this
button will immediately turn the power off. UNLESS OTHERWISE DIRECTED, DO NOT USE THE RED
SWITCH TO POWER OFF A NETWORK CONNECTED MACHINE. The processor may be damaged.
Emergency procedure
The only method to cut power to the machine COMPLETELY is to disconnect the power cord.
Power Switch
Secondary Power
Switch
Off
On