User guide

May 2003 604E02400 17
EXERCISE 14 - Enlarge An Image
OBJECTIVE: Practice programming a 2 Sided enlarge copy job.
1. Place the output from the previous exercise in the Document Feeder in LEF orientation.
2. Select a Paper Tray with LEF paper > Save.
3. Select 2-2 sided.
4. Under Reduce/ Enlarge select More...and select 200%.
5. Select Save.
6. Select 1 copy on the keypad.
7. Press the Start button.
8. Ensure the copy is two sided and the copy image is larger than the original image. You may discard
this copy.
9. Remove the originals > Press Clear All.
RESULT: A 2-sided copy with enlarged images on each side.
Make this selection last because
it will change the screen