User guide

May 2003 604E02400 14
EXERCISE 11 - Copy from the Document Glass
OBJECTIVE: Use the 2 Sided Copy feature.
1. Raise the Document Glass Cover.
2. Place the copies from the previous exercise face down and flush against the upper left corner of the
Document Glass. Lower the Document Cover.
3. Select a Paper Tray with LEF paper > Save. You might have to fill the Paper Tray with the desired
paper.
4. Select 1>2 Sided in the 2 Sided Copy column.
5. Select 100% Reduce/Enlarge.
6. Select 2 copies on the keypad > Start.
7. Note: The Job Monitor window will pop-up after you press Start. This will show the status of the job you
just started. You can select Programme Next Job to close the window or wait until the job is completed
when it will close automatically.
8. Check the copy quality. Save these copies for use in the next copy job.
9. Remove the originals > Close the Document Glass Cover.
10. Press Clear All.
RESULT: 2-sided copies from your 1-sided original.
Registration
Corner