User Manual

4. Load sheet-labels in the Bypass Tray, face up, with the top edge of the page feeding
into the printer first.
5. Adjust the width guides until they touch the edges of the paper.
6. The printer prompts you to verify the type, size and color of the label sheets.
a) If the type, size and color are correct, touch OK.
b) If the type, size or color are incorrect, change the settings.
• To select the type, touch the current paper type, then from the list, select
Labels.
• To select a size, touch the current size setting, then from the list, select a
size.
• To select the color, touch the current paper color, then from the list, select
a color.
c) To save the settings, touch OK.
Loading Labels in Tray 1
1. To remove the tray from the printer, pull out the tray until it stops. Lift the front of
the tray slightly, then pull it out.
2. Adjust the paper length and width guides.
3. Load the label sheets in the tray, face up.
6-23Xerox
®
VersaLink
®
C500 Color Printer
User Guide
Paper and Media