User's Manual

Adjusting Color, Image, and Text Detection
Settings
CCoonnffiigguurriinngg tthhee CCoolloorr CCaalliibbrraattiioonn aatt tthhee CCoonnttrrooll
PPaanneell
Use Color Calibration to adjust colors that appear incorrect, or for composite grays that look neutral.
To perform a Color Calibration:
1. At the printer control panel, log in as administrator.
2. Press the Home button.
3. Touch Device→Support→Color Calibration.
4. To select a screen to use for your calibration, touch Screen Type, then select an option.
• To optimize color tones for copy jobs, touch Copy Job.
• To optimize color tones for Standard print-quality print jobs, touch Print Job 1.
• To optimize color tones for Enhanced print-quality print jobs, touch Print Job 2.
5. To select a target job type for your calibration, touch Target, then select the type of output that
you want calibrated.
• To optimize color for copy jobs, print jobs, or both, select the appropriate option.
• To reset the printer to factory defaults, touch None.
6. To select the source paper tray, touch Paper Supply, then touch the desired tray.
7. To begin the color calibration, touch Start. Follow the onscreen instructions.
8. When finished, touch Close.
9. To exit the menu, touch the Back arrow.
10. To return to the Home screen, press the Home button.
PPeerrffoorrmmiinngg aann AAuuttoommaattiicc CCoolloorr RReeggiissttrraattiioonn aatt tthhee
CCoonnttrrooll PPaanneell
Color registration ensures that all the color sources align correctly on the page.
A color registration adjustment occurs every time a new toner cartridge is installed. You can run this
adjustment at other times as needed.
To perform a color registration adjustment automatically:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Color Registration - Automatic.
3. Touch Start.
4. At the prompt for successful completion, touch Close.
192
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Administrator Tools