User's Manual

8. To configure the FTP or SFTP Fax Server settings, click Setup, then enter the following
information:
• IP Address: Port: Enter the IP address of your fax server, then enter the port number.
• Document Path: Enter the directory path of the folder, beginning at the root of FTP or SFTP
services. For example, //directoryname/foldername.
• Login Name: Enter a user name corresponding to a user account login name on the server.
• Password: Enter the password corresponding to a user account password on the server.
• Retype Password: Enter the login password again.
9. Click OK.
CCoonnffiigguurriinngg aa FFaaxx RReeppoossiittoorryy UUssiinngg SSMMBB
Before you begin:
• Create a shared folder for a fax repository. Note the share name of the folder and the computer
name or server name.
• Create a user account and password for the printer with full access rights to the fax repository.
Note the user account and password.
To configure a fax repository using SMB:
1. In the Embedded Web Server, log in as administrator, then click Apps.
2. In the Installed Apps area, click Server Fax.
3. For Display on Device, click Show.
4. For Server and Protocol, click Edit. From the list, select SMB.
5. To enable SMB, for Port, click the toggle button.
6. If needed, for WINS Server Address Acquisition by DHCP, click the toggle button.
7. If you did not enable WINS Server Address Acquisition by DHCP:
• For Primary WINS Server Address, type the IP address for your primary WINS server.
• For Secondary WINS Server Address, type the IP address for your secondary WINS server.
Note: If DHCP is configured, WINS IP addresses are overridden.
8. Click OK.
9. To configure the SMB Fax Server settings, click Setup, then enter the following information:
• IP Address: Port: Enter the IP address of your fax server, then enter the port number.
• Share: Enter the share name.
• Document Path: Enter the directory path of the folder, starting at the root of the shared
folder. For example, if you have a folder named serverfax in the shared folder, type
\serverfax.
• Login Name: Enter a user name corresponding to a user account login name on the server.
• Password: Enter the password corresponding to the user account password on the server.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
161
Faxing