User's Manual

• Enter up to 50 domains to block.
• To delete domains from the list, click the Trash icon.
7. To disable domain filtering, select Off.
8. When finished, click OK.
Note: For domain filtering, you can either allow domains or block domains. The
configuration window does not let you list both domains to allow and domains to
block at the same time.
9. Ensure that all SIP settings are completed.
10. Click OK.
CCoonnffiigguurriinngg TT..3388 SSeettttiinnggss
1. In the Embedded Web Server, log in as administrator, then click Apps→Fax.
2. In the SIP Settings area, click T.38.
3. Click T.38 Transport Protocol, then select an option.
4. If needed, for UDPTL Listening Port Number, type a new port number.
5. If needed, for TCP Listening Port Number, type a new port number.
6. If needed, for RTP Listening Port Number, type a new port number.
7. Click OK.
PPrriinnttiinngg FFaaxx RReeppoorrttss
CCoonnffiigguurriinngg RReeppoorrttss
The Embedded Web Server allows you to configure three types of reports:
• Activity Report: This report provides a summary of faxes sent and received. You can generate this
report from the printer control panel. By default, this report prints automatically after 100 fax
transmissions and receptions. You can also generate this report manually.
• Confirmation Report: This report acknowledges the transmission of a fax sent to a single
recipient. The Fax app generates this report automatically.
• Broadcast Report: This report acknowledges the transmission of a fax sent to multiple recipients.
The Fax app generates this report automatically.
To configure these reports:
1. In the Embedded Web Server, log in as administrator, then click Apps→Fax.
2. In the General Settings and Policies area, click Activity Report.
• To enable activity reports, click Print Activity Report, then select On.
• Configure the remaining settings as needed.
• Click OK.
154
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Faxing