User Manual
Table Of Contents
- Safety
- Getting Started
- Parts of the Printer
- Power Options
- Accessing the Printer
- Introduction to Apps
- Information Pages
- The Embedded Web Server
- Installation and Setup
- Installation and Setup Overview
- Selecting a Location for the Printer
- Connecting the Printer
- Selecting a Connection Method
- Connecting to a Computer Using USB
- Connecting to a Wired Network
- Connecting to a Wireless Network
- Initial Printer Setup
- Configuring AirPrint
- Google Cloud Print
- Installing the Software
- More Information
- Customize and Personalize
- Xerox® Apps
- Printing
- Printing Overview
- Selecting Printing Options
- Printing From a USB Flash Drive
- Printing Features
- Managing Jobs
- Printing Special Job Types
- Selecting Paper Options for Printing
- Scaling
- Printing on Both Sides of the Paper
- Print Quality
- Image Options
- Image Shift
- Color Adjustments
- Printing Mirror Images
- Printing Multiple Pages to a Single Sheet
- Printing Booklets
- Using Special Pages
- Printing Watermarks for Windows
- Orientation
- Printing Banner Pages
- Selecting Job Completion Notification for Windows
- Using Custom Paper Sizes
- Paper and Media
- Maintenance
- Troubleshooting
- Specifications
- Regulatory Information
- Basic Regulations
- Copy Regulations
- Safety Certification
- Material Safety Data Sheets
- Recycling and Disposal
Maintenance
Xerox
®
VersaLink
®
C400 Color Printer 129
User Guide
Adjustments and Maintenance Procedures
This section includes:
• Color Registration .......................................................................................................................................................... 129
• Performing a Color Calibration ................................................................................................................................. 129
• Adjusting Paper Registration ..................................................................................................................................... 130
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on.
You can also adjust color registration manually any time the printer is idle. You must adjust the
color registration any time the printer is moved. If you are having printing problems, adjust the
color registration.
Performing a Color Registration Adjustment
A color registration adjustment occurs every time a new toner cartridge is installed. You can run this
adjustment at other times as needed.
To perform a color registration adjustment:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Color Registration.
3. To perform an Automatic Color Registration adjustment, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
Performing a Color Calibration
The Color Calibration procedure is performed using the Embedded Web Server.
To perform a manual Color Calibration:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address for your printer, refer to Finding the IP Address of Your
Printer on page 30.
2. Click System, then click Defaults & Policies.
3. Click Manual Color Adjustment.
4. Adjust the Photo and Text color levels as required.
5. To save the settings, click OK.