User Manual
Table Of Contents
- 1 Safety
- 2 Learn about the Printer
- 3 Set up, Install, and Configure
- 4 Secure the Printer
- 5 Print
- 6 Use the Printer Menus
- 7 Maintain the Printer
- 8 Troubleshoot a Problem
- A Regulatory Information
- B Recycling and Disposal
Menu item
Description
NPA Mode
Auto*
Off
Set the printer to perform the special processing
required for bidirectional communication, following
the conventions defined by the NPA protocol.
The printer restarts after changing the setting.
Job Buffering
On
Off*
Temporarily store print jobs in the printer hard disk
before printing.
This menu item appears only when a hard disk is
installed.
Mac Binary PS
Auto*
On
Off
Set the printer to process Macintosh binary PostScript
print jobs.
• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.
WWii--FFii DDiirreecctt
Note: This menu appears only when a direct Wi-Fi network is the active network.
Menu item
Description
Enable Wi-Fi Direct
• On
• Off
Specify the service set identifier (SSID) of the Wi-Fi
network.
Wi-Fi Direct Name .
Wi-Fi Direct Password Password must be at least 8 characters in length.
Show Password on Setup Page
• On
• Off
Specify the IP address of the group owner.
Preferred Channel Number
• Auto
• 1 through 11
Group Owner IP Address
Auto-Accept Push Button Requests Accept requests to connect to the network
automatically.
Accepting clients automatically is insecure.
106
Xerox
®
C310 Color Printer
User Guide
Use the Printer Menus