User Manual

Table Of Contents
UUSSBB
Menu Item
Description
PCL SmartSwitch
Off
On*
Set the printer to switch to PCL emulation when a
print job received through a USB port requires it,
regardless of the default printer language.
Note: If PS SmartSwitch is off, then the
printer does not examine incoming data and
uses the default printer language specified in
the Setup menu.
PS SmartSwitch
Off
On*
Set the printer to switch to PS emulation when a
print job received through a USB port requires it,
regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the
printer does not examine incoming data and
uses the default printer language specified in
the Setup menu.
Mac Binary PS
On
Auto*
Off
Set the printer to process Macintosh binary PostScript
print jobs.
When set to On, the printer processes raw binary
PostScript print jobs from computers using the
Macintosh operating system.
When set to Auto, the printer processes print jobs
from computers using either Windows or
Macintosh operating systems
When set to Off, the printer filters PostScript print
jobs using the standard protocol.
Enable USB Port
Disable
Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
RReessttrriicctt EExxtteerrnnaall NNeettwwoorrkk AAcccceessss
Menu Item
Description
Restrict external network access
Off*
On
Restrict access to network sites.
External network address Specify the network addresses with restricted access.
E-mail address for notification Specify an e-mail address to send a notification of
logged events.
Ping frequency
1–300 (10*)
Specify the network query interval in seconds.
96
Xerox
®
C230 Color Printer
User Guide
Use printer menus