Manualshelf

Owners manual

ManualsBrandsXerox ManualsComputers & LaptopsVersaLink B400/DNM Laser Printer - Monochrome - 1200 x 1200 dpi Print - Plain Paper Print - Desktop - 47 ppm Mono Print -
111112113114115116117118119120
Paper and Media
116 Xerox
®
VersaLink
®
B400 Printer
User Guide
Adjusting the Fuser for Printing Envelopes
The Fuser has two switches that require adjustment to enable printing on Envelopes. If the switches are
not set to the correct position for Envelope printing, image quality issues and poor fusing can occur.
To adjust the Fuser to enable printing on Envelopes:
1. On the back of the printer, lift the door release latch, then pull open the door.
2. To open the Fuser, lift both green fuser levers to their full-upright position.
3. Locate the two gray Fuser switches, then slide each one to the setting for envelopes.