Owners manual

Paper and Media
110 Xerox
®
VersaLink
®
B400 Printer
User Guide
Configuring Trays 1–4 for the Paper Length
You can adjust the lengths of trays 1–4 to accommodate A4, Letter (8.5 x 11 in.), and larger paper sizes.
For the longer-length settings, the trays protrude from the front of the printer.
To change Trays 1–4 to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then remove it.
3. Configure the tray.
− To compress the tray for shorter paper, hold the back of the tray with one hand. With the other
hand, press the release latch at the front of the tray, then push the ends inward until they latch.
− To extend the tray for longer paper, hold the back of the tray with one hand. With the other
hand, press the release latch at the front of the tray, then pull the ends outward until
they latch.
To protect the paper when the tray is extended, place the paper cover over the extended
section of the paper tray.