User Manual

Note: You can also configure the Wi-Fi Direct name and password.
For non-touch-screen printer models, press
to navigate through the settings.
FFoorr WWiinnddoowwss UUsseerrss
1. Open Printers & scanners, and then click Add a printer or scanner.
2. Click Show Wi-Fi Direct printers, and then select the printer Wi-Fi Direct name.
3. From the printer display, take note of the eight-digit PIN of the printer.
4. Enter the PIN on the computer.
Note: If the print driver is not already installed, then Windows downloads the appropriate
driver.
FFoorr MMaacciinnttoosshh UUsseerrss
1. Click the wireless icon, and then select the printer Wi-Fi Direct name.
Note: The string DIRECT-xy (where x and y are two random characters) is added before the Wi-
Fi Direct name.
2. Type the Wi-Fi Direct password.
Note: Switch your computer back to its previous network after disconnecting from the Wi-Fi
Direct connection.
DDeeaaccttiivvaattiinngg tthhee WWii--FFii nneettwwoorrkk
1. From the printer control panel, navigate to:
Settings > Network/Ports > Network Overview > Active Adapter > Standard Network
For non-touch-screen printer models, press
to navigate through the settings.
2. Follow the instructions on the display.
CChheecckkiinngg tthhee pprriinntteerr ccoonnnneeccttiivviittyy
1. Print the Network Setup Page.
From the control panel, navigate to:
Settings > Reports > Network > Network Setup Page
For non-touch-screen printer models, press
to navigate through the settings.
2. Check the first section of the page and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive or the network cable may be
unplugged or malfunctioning. Contact your administrator for assistance.
Xerox
®
B225/B235 Multifunction Printer
User Guide
65
Set up, install, and configure