User Manual
Table Of Contents
- User Guide
- 1 Safety
- 2 Learn about the printer
- 3 Set up, install, and configure
- Selecting a location for the printer
- Attaching cables
- Finding the IP Address of the Printer
- Setting up the printer to fax
- Configuring the Email SMTP Settings
- Loading paper and specialty media
- Installing and updating software, drivers, and firmware
- Installing the Software
- Operating System Requirements
- Installing the Print Drivers for a Windows Network Printer
- Installing the Windows Print Driver .zip File
- Installing the Print Drivers for a Windows USB Printer
- Installing the Printer as a Web Service on Devices
- Installing the Drivers and Utilities for MacOS
- Installing Print Drivers and Utilities for UNIX and Linux
- Updating Firmware
- Exporting or importing a configuration file
- Installing the Software
- Networking
- Printing the Menu Settings Page
- 4 Secure the printer
- 5 Print
- 6 Copy
- 7 Email
- 8 Fax
- 9 Scan
- 10 Use printer menus
- 11 Maintain the Printer
- 12 Troubleshoot a problem
- Print quality problems
- Printing problems
- Print quality is poor
- Blank or White Pages
- Dark Print
- Fine lines are not printed correctly
- Folded or wrinkled paper
- Gray Background
- Incorrect margins
- Light print
- Mottled print and dots
- Paper curl
- Print crooked or skewed
- Solid black pages
- Text or images cut off
- Toner easily rubs off
- Horizontal light bands
- Vertical light bands
- Vertical white lines
- Vertical dark bands
- Vertical dark lines or streaks
- Vertical dark streaks with print missing
- Repeating defects
- Print jobs do not print
- Job prints from the wrong tray or on the wrong paper
- Slow printing
- Print quality is poor
- The printer is not responding
- Unable to read flash drive
- Enabling the USB port
- Network connection problems
- Issues with supplies
- Clearing Jams
- Paper feed problems
- E-mailing problems
- Faxing problems
- Scanning problems
- Cannot scan to a computer
- Cannot scan to a network folder
- Partial copies of document or photo
- Scan job was not successful
- Poor copy quality
- Vertical dark streaks on output when scanning from the ADF
- Scanner does not close
- Scanning takes too long or freezes the computer
- Scanner does not respond
- Adjusting scanner registration
- Adjusting ADF registration
- Contacting Customer Support
- A Regulatory Information
- Basic Regulations
- Noise Emission Levels
- Static Sensitivity Notice
- ENERGY STAR
- Temperature Information
- Información de la energía de México
- Laser Notice
- Power
- Telecommunication Regulatory Notices
- Regulatory Notices for Wireless Products
- Federal Communications Commission (FCC) Compliance Information Statement
- Innovation, Science and Economic Development Canada Compliance Statement
- Germany
- Turkey RoHS Regulation
- Ukraine RoHS Compliance
- Copy Regulations
- Material Safety Data Sheets
- Basic Regulations
- B Recycling and Disposal
SSoolliidd bbllaacckk ppaaggeess
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel,
navigate to Settings > Troubleshooting > Print Quality Test Pages. For non-touch-screen
printer models, press OK to navigate through the settings.
Action Yes No
Step 1
a. Check if the printer is using a
genuine and supported Xerox
toner cartridge.
If the toner cartridge is not
supported, then install a
supported one.
b. Print the document.
Is the printer printing solid black
pages?
Go to step 2. The problem is solved.
Step 2
a. Remove, and then insert the
imaging unit.
Do not expose the imaging
unit to direct light for more
than 10 minutes. Extended
exposure to light may cause
print quality problems.
Do not touch the
photoconductor drum under
the imaging unit. Doing so
may affect the quality of
future print jobs.
b. Print the document.
Is the printer printing solid black
pages?
Go to step 3. The problem is solved.
220
Xerox
®
B225/B235 Multifunction Printer
User Guide
Troubleshoot a problem