User Manual

Scanning to a Computer
Before you begin, make sure that:
• The printer firmware is updated. For more information, see Updating Firmware.
• The computer and the printer are connected to the same network.
FFoorr WWiinnddoowwss uusseerrss
Note: Make sure that the printer is added to the computer. For more information, refer to
Installing the Software.
1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, open Windows Fax and Scan.
3. From the Source menu, select a scanner source.
4. If necessary, change the scan settings.
5. Scan the document.
FFoorr MMaacciinnttoosshh uusseerrss
Note: Make sure that the printer is added to the computer. For more information, refer to
Installing the Software.
1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, do either of the following:
• Open Image Capture.
• Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3. From the Scanner window, do one or more of the following:
• Select where you want to save the scanned document.
• Select the size of the original document.
• To scan from the ADF, select Document Feeder from the Scan Menu or enable Use
Document Feeder.
• If necessary, configure the scan settings.
4. Click Scan.
Xerox
®
B225/B235 Multifunction Printer
User Guide
115
Scan