User's Manual

Network Connectivity
Xerox
®
B215 Multifunction Printer
User Guide
70
3. For Protocol, select Enable.
4. Type an LPR/LPD Port Number or use the default port number of 515.
5. Click Apply.
Raw TCP/IP Printing
Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from
the computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows
as the Standard TCP/IP port.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account.
Configuring Raw TCP/IP Printing Using the Printer Control Panel
1. At the printer control panel, Device  Network  Advanced Settings.
2. Touch Raw TCP/IP-Printing.
3. Touch Enable.
4. Ensure that Port Number is set to 9100.
5. Touch
 Confirm.
6. To return to the home screen, press the Home button.
Configuring Raw TCP/IP Settings Using Xerox
®
CentreWare
®
Internet
Services
1. In Xerox
®
CentreWare
®
Internet Services, click Properties  Connectivity  Protocols.
2. Click Raw TCP/IP Printing.
3. For Protocol, select Enable.
4. Ensure that Port Number is set to 9100.
5. Click Apply.
IPP
Internet Printing Protocol (IPP) is a standard network protocol that allows you to print and manage
jobs remotely.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account.