User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Initial Setup
Xerox
®
B215 Multifunction Printer
User Guide
54
USB Direct Connection
If your printer is connected to your computer directly, using a USB AB cable, configure settings using
Xerox Easy Printer Manager.
1. Connect the one end of the USB AB cable to the USB B port on the back of the printer. Connect
the other end to a standard USB A connection on your computer.
2. At your computer, open Easy Printer Manager.
3. Click Printer, then select the USB connected printer.
4. Click Advanced Setting or Machine Settings.
5. Configure the device and network settings required. Click Save.
Installation Wizard
The Installation wizard starts the first time you power on the printer. The wizard prompts you with a
series of questions to help you configure basic printer settings.
When the installation wizard appears, follow the on screen instructions.
When the installation wizard has completed, to configure basic fax settings, use the Fax Setup wizard.
For details, refer to Fax Settings.
Note: After the initial setup, to change any printer configuration settings, or to configure other
printer settings, refer to Accessing Administration and Configuration Settings.