User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Xerox
®
CentreWare
®
Internet Services
Xerox
®
B215 Multifunction Printer
User Guide
52
2. In the address field, type the IP address of the printer.
Note: If you do not know the IP address of your printer, refer to Finding the IP Address of Your
Printer.
3. Press Enter or Return.
Note: If you are accessing Xerox
®
CentreWare
®
Internet Services for the first time after printer
installation, you will be prompted to change the Administrator Account password. For instructions,
refer to Accessing Xerox
®
CentreWare
®
Internet Services and Changing the Default System
Administrator Password.
4. Click Properties, then configure the settings required.
When you select an option which requires Administrator Account access, a security login window
appears.
5. For User Name, enter Admin. For Password, enter the administrator account password that was
set during initial access to Xerox
®
CentreWare
®
Internet Services. Click OK.
You are now able to configure and save settings.
Changing the System Administrator Password
To prevent unauthorized changes to printer settings, ensure the Administrator Account password is
changed regularly. Be sure to store the password in a secure location.
Note: If you are accessing Xerox
®
CentreWare
®
Internet Services for the first time after printer
installation, you will be prompted to change the Administrator Account password. For instructions,
refer to Accessing Xerox
®
CentreWare
®
Internet Services and Changing the Default System
Administrator Password.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties.
2. Click Maintenance.
3. Click Administrator Password.
4. To change the Administrator Account password, enter a new password in the Password field.
Passwords can contain between 4 and 32 characters and the following characters can be used:
• Letters: a - z, A - Z
•Numbers: 0 - 9
• Special Characters: @ / . ‘ & + - # * , _ % ( ) !
5. To verify the password, enter the password again in the Verify Password field.
6. To save the new password, select the Select to save a new password check box.
7. Click Save.










