User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Xerox
®
CentreWare
®
Internet Services
Xerox
®
B215 Multifunction Printer
User Guide
51
Accessing Xerox
®
CentreWare
®
Internet Services and
Changing the Default System Administrator Password
For network printers, when you first access Xerox
®
CentreWare
®
Internet Services after printer
installation, the system prompts you to change the default system administrator password.
The initial default password is the printer serial number. The printer serial number is located on the
data label on the rear cover, and is printed on the System Configuration report. It is also displayed on
the Device
About General screen.
Note: For printers connected using a USB connection only, you do not need to perform this
procedure.
To access Xerox
®
CentreWare
®
Internet Services for the first time and change the default system
administrator password:
1. At your computer, open a Web browser.
2. In the address field, type the IP address of the printer, then press Enter or Return.
Note: If you do not know the IP address of your printer, refer to Finding the IP Address of Your
Printer.
A message appears prompting you to change the Administrator Settings.
3. To enter the default password, in the Password field, type the printer serial number.
4. To enter a new password, in the New Password field, type the new password.
Passwords can contain between 4 and 32 characters and the following characters can be used:
• Letters: a - z, A - Z
•Numbers: 0 - 9
• Special Characters: @ / . ‘ & + - # * , _ % ( ) !
5. To verify the password, enter the password again in the Verify Password field.
6. To save the new password, click Save.
The Administrator Account password is updated and access to Xerox
®
CentreWare
®
Internet
Services is granted.
Accessing the Xerox
®
CentreWare
®
Internet Services
Administrator Account
Many features in Xerox
®
CentreWare
®
Internet Services require an administrator user name and
password. When updating Security options, you will be prompted to enter the Administrator Account
login details.
To access the Xerox
®
CentreWare
®
Internet Services Administrator Account:
1. At your computer, open a Web browser.