User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Loading Paper
Xerox
®
B215 Multifunction Printer
User Guide
184
Loading Paper
One paper tray and a manual feed slot are standard on your printer.
Various media sizes and types can be used in the trays. For more media specifications, refer to
Supported Paper.
Preparing Paper for Loading
Before loading paper into the paper trays, flex or fan the
edges of the paper stack. This procedure separates any sheets
of paper that are stuck together and reduces the possibility of
paper jams.
Note: To avoid unnecessary paper jams and misfeeds do
not remove paper from its packaging until required.
Loading Tray 1
The paper level indicator on the front of tray 1 shows the
amount of paper currently left in the tray. When the tray is
empty, the indicator is completely lowered as shown in the
illustration: 1 shows full, 2 shows empty.
Using the instructions provided below, load paper into the
printer. Tray 1 holds up to 250 sheets of 20 lb (80 g/m²)
paper, A4 and letter only. It holds fewer sheets of other media
sizes. For more media specifications, refer to Supported Paper.
1. Pull out tray 1 and load paper into the tray, print side
down. Do not fill above the Maximum Fill line indicated
by the symbol .
1 2