User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Scan To
Xerox
®
B215 Multifunction Printer
User Guide
136
Linux Scanning
This section describes the procedure for scanning using applications on a Linux computer. For
information about the supported Linux Operating Systems, refer to System Requirements.
For Linux scanning, the Unified Linux Driver with a scanning application such as Simple Scan, or GIMP
must be installed. Printer drivers for Linux Operating Systems can be downloaded from
www.xerox.com/office/B215support.
Before you begin:
• Ensure the Scan function has been set up for your device. For details, refer to Installation and
Setup.
• Ensure the applications required are loaded on your Linux computer and ready to use.
Scanning Using Simple Scan
Make sure that the printer is powered on and connected to your computer using a USB cable, or
installed on the network. Download and install the Unified Linux Driver, refer to Installing Printer
Software.
1. At the printer, load originals face up into the automatic document feeder, or place a single original
face down on the document glass.
2. Open the Simple Scan application.
3. To select the scanner, click the menu icon and select Preferences. From the Scanner list, select the
printer.
4. To select additional scanning preferences, choose options from the Scanning and Quality tabs,
then click X.
5. From the Scan menu, select scan options required:
Feature Description
Single Page Use this option to scan a single page from the
document glass.
All Pages From Feeder Use this option to scan multiple pages loaded into
the Automatic Document Feeder.
Multiple Pages From Flatbed Use this option to scan a multi-page job using the
document glass. Load original documents one at a
time.
Text or Photo Use this option to select the type of originals being
scanned.