Guide

Back to Previous Page

Use WPS to add the printer to the Wi-Fi network.

Perform the following steps:

1. Activate WPS from your router, if required. Some routers have a

WPS button on them and others require configuration from the

router’s interface/web page. Refer to your router’s user

documentation.

2. Push and hold WPS button on the printer for 2 seconds.

3. Wait 2-3 minutes for the blue WPS button to stop flashing.

4. Wait approximately 1 minute for the printer to obtain a valid IP

address.

5. Press the red Stop button to print a configuration report and verify

that an IP address was obtained.

 For more detailed steps to verify the IP address, click here.

Add the Printer to the Wireless Network via WPS

Back to Start

Try a different method to setup WiFi