User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Security
- Specifications
- Regulatory Information
- Recycling and Disposal
Network Settings
Xerox
®
B205 Multifunction Printer
User Guide
57
Network Settings
You may set up the network using the printer display screen. Before doing that, you must have the
relevant information concerning the type of network protocols and computer system you use.
To configure Network Connectivity settings Using Xerox
®
CentreWare
®
Internet Services, refer to
Network Connectivity.
Configuring Network Settings Using the Printer Control
Panel
1. To access the System Menus, press the Machine Status button on the control panel.
2. Press the Up/Down arrows to select Network and press OK.
The following Network options and settings are available:
Option Description Settings
TCP/IP (IPv4) Select appropriate protocol and
configure parameters to use the
network environment.
•DHCP
•BOOTP
•Static
TCP/IP (IPv6 Select appropriate protocol and
configure parameters to use the
network environment.
• IPv6 Protocol
•DHCPv6 Config
-Router
-Always Use
-Never Use
Ethernet Speed Configure the network transmission
speed.
•Ethernet Port Speed
-On
-Off
-Automatic
- 10 mbps Half
-10 mbps Full
- 100 mbps Half
-100 mbps Full
802.1x Use to configure 802.1x. • Off
•On