User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Security
- Specifications
- Regulatory Information
- Recycling and Disposal
Power Options
Xerox
®
B205 Multifunction Printer
User Guide
29
Power Options
Powering On the Printer
The Power On/Off button is a single multifunction button on the control panel. The power cable socket
is located at the rear of the printer.
1. Connect the AC power cord to the printer and a power
outlet. The power cord must be plugged into a grounded
power socket.
2. Press the Power On/Off button on the control panel.
The printer powers on.
Power Saver Mode
This device contains advanced energy conservation technology that reduces power consumption when
it is not in active use. When the printer does not receive data for an extended period of time, the Power
Saver mode becomes active and power consumption is automatically lowered.
To enter Power Saver mode:
1. Press the Power Saver button.
2. Use the Up/Down arrow buttons to select Power Saver, then press OK.
Powering Off the Printer
There are two ways to power off the printer:
•Press the Power On/Off button.
•Press the Power Saver button. Use the Up/Down arrow buttons to select Power Down, then press
OK.
CAUTION: Do not unplug the power cord while the printer powers down.