User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Security
- Specifications
- Regulatory Information
- Recycling and Disposal
Software Verification Test
Xerox
®
B205 Multifunction Printer
User Guide
237
Software Verification Test
You can test the printer software to confirm that it is operating correctly. The test checks software files
to confirm that they are not corrupt. If the printer software appears to function improperly, a Xerox
representative can ask you to perform this test.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties
Security.
2. Click Software Verification Test.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to Accessing the Xerox
®
CentreWare
®
Internet Services Administrator Account.
3. To begin the test, click Start Test.
4. To interrupt and cancel the test, click Cancel.
5. A message displays to indicate the results of the test. Click Close.
Note:
• You can continue to use the device while the test is running.
• If the test fails, the software files are corrupt. It is recommended that you reinstall the
software. For help, contact a Xerox representative.