User's Manual

Loading Paper
Xerox
®
B205 Multifunction Printer
User Guide
158
Acceptable print media is plain paper from 3.0 x 5.0 inches to 8.5 x 14 inches Legal (76 mm x 127 mm
to 216 mm x 356 mm) and weighing between 16 lb and 58 lb (60 g/m²
and 220 g/m²). For more media
specifications, refer to Supported Paper.
Loading the Manual Feed Slot
1. Press to open the manual feed slot, located on the front
of the printer.
Note: The manual feed slot holds 1 sheet of the following
media: 20 lb (80 g/m²) plain paper, transparency, label,
envelope, or cardstock.
2. Load the print material between the width guides with
the print side facing up.
Note: Hold a transparency by the edge and avoid
touching the print side.
3. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
4. After loading paper, if prompted, verify the paper size
and type settings on the screen. To keep the same
settings, press OK. To change the settings, press the
down arrow, then press OK and adjust the settings:
• To select a paper size, press the up/down arrows to select Paper Size, then press OK. Press the
up/down arrows to select the paper size you want, then press OK.