Owners manual

Loading Paper
Xerox® Phaser® 3052/3260
User Guide
56
Loading the Manual Feed Slot
1. Press to open the manual feed slot, located on the front
of the machine.
Note: The manual feed slot holds 1 sheet of the following
media: 20 lb (80 g/m²) plain paper, transparency, label,
envelope or cardstock.
2. Load the print material between the width guides with
the print side facing up.
Note: Hold a transparency by the edge and avoid
touching the print side.
3. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
4. After loading paper in the paper tray, ensure you select
the Paper tab in the print driver to specify the correct
paper size and type. For the source, you must select
Manual Feeder. Not confirming the paper details may
result in printing delays.
Envelope Mode
1. Press to open the manual feed slot, located on the front
of the machine.
2. Remove any curl on the envelope before loading it into
the manual feed slot.
Note: For more information on media specifications,
refer to Media Specifications.