User's Manual

PRINTERS
3-6 XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE
either check the Printer Controller for messages concerning the
maintenance task or touch the Guarded Tools icon to display
the Guarded Tools screen. If you are not an ACT/eXcellerate
trained operator, notify your lead operator or an ACT/
eXcellerate trained operator at your site.
12. Message area
The message area is used as follows:
• Lines 1 and 2. These lines display the current status of the
printer, for example, READY.
• Line 3. This line displays messages concerning masked
conditions, such as low dry ink. These messages are
preceded by an asterisk.
• Line 4. This line displays messages that originate at the
Printer Controller.
Printer configurations
The DocuPrint 96 NPS base system is configured with one inverter
feeder/stacker module; one additional feeder/stacker module is
optional. Input enablement and bypass transport devices can also be
used.
Note: The input enablement and bypass transport devices are
offered as optional components. These options allow you to
customize your printer for increased efficiency and specialized
applications, such as roll feed and finishing devices. The middle
feeder/stackers are also optional for the 4635 and 180 NPS.
Figure 3-4. DP 96 NPS: Printer + Inverter Feeder Stacker
The DocuPrint 4635 and 180 are available in the configurations
shown in the following figures.