User's Manual

PRINTERS

3-4 XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE

Printer control console The printer control console is the color monitor located on top of the

printer. It contains message areas and graphic displays that alert you

to paper jams and other fault conditions, such as low toner. The

printer control console also contains buttons that allow you to control

certain functions of the printer, such as continuing an interrupted job,

without returning to the Printer Controller.

The printer control console has the following features:

• Local controls and displays for jam clearance, paper loading/

unloading, and diagnostics/service (used by the service

representative). Two types of messages are displayed on the

printer control console: fault messages, which relate to printer

malfunctions, and information messages, which relate to printer

conditions such as low dry ink.

• Touch-sensitive areas that allow you to select options by

touching the printer control console screen. A tone sounds

when you touch one of these areas.

• Printer alarm consisting of three beeps, repeated for ten

seconds. The alarm is generated by any event that stops the

printer.

The alarm stops after three cycles or as soon as you start to clear the

fault condition (for example, when you open doors or covers

specified in the clearance instructions). You can stop the alarm by

pressing one of the printer control console buttons or by selecting a

function through the touch screen.

Figure 3-3. Printer control console

1 Language icon

2 Printer icon

3 Fault List icon

4 Tools icon

5 Guarded Tools icon (not available on the 96 NPS)

6 Clear button

7 Continue button

8 Stop button

Ready

Printer Options

12345

8910

Clear