Owner's manual

PRINTERS

XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE 4-9

Feeder tray control panels Each processor feeder tray and HCF tray has a control panel

consisting of a button, indicators, and paper level displays.

Figure 4-3. Feeder tray control panel

1 Ready to Open indicator

2 Please Wait indicator

3 Tray Unlock button

4 Paper Level indicators

1. Ready to Open indicator

This indicator glows when paper can be added to the tray.

2. Please Wait indicator

This indicator shows that the tray is in motion. It is lit when the

Tray Unlock button is pressed, when the tray is being lowered,

or when the tray is being raised. The indicator goes off when

the tray elevator reaches its destination.

3. Tray Unlock button

You can use this button any time the Please Wait indicator is off.

• If the tray is in use when this button is pressed, the feed

selection changes to the backup tray if one exists.

Otherwise, printing stops.

• If the tray is in use and selected as a backup tray, pressing

this button causes the tray elevator to lower and the tray is

no longer available for auto switching.

• If the tray elevator is in the raised position and the tray is not

in use or selected as a backup tray, pressing this button

causes the elevator to lower with no effect on printing

operations.

4. Paper Level indicators

These indicators display the approximate quantity of paper

within the tray. The display shows paper by quarter reams up to

one ream, and then by full reams. The green indicator light

appears above the Paper Level indicator which shows the

amount of paper in the tray.

Ready

to open

Please

wait

Tray

unload