User Manual

148 • Appendices XEROX WIDE FORMAT COPY SYSTEM
Appendix 2
Paper sizes supported by the 8825, 8830, 8850 510 Series, and 721P Printers
and the Controller with Firmware 9.1 or higher are shown in Table 10.
The X2 TECH Color Printer is available in two configurations, capable of printing
on media up to 36" wide, or on media up to 54" wide, depending upon your
equipment order and installation. The Media types supported by your X2 TECH
printer and AccXES firmware can be checked using the Media Page of the Web
PMT. Available roll sizes for each supported media type can be quickly and
easily checked from the supplies page of the XEROX website at www.xerox.com.
Table 10. Printer paper sizes
Paper size Dimension 8825/8830/8850
/510dp Series
721P
ISO A0 841 x 1189 mm X X
ISO A1 594 x 841 mm X X
ISO A2 420 x 594 mm X X
ISO A3 297 x 420 mm X X
ISO A4 210 x 297 mm X X
ISO B1 707 x 1000 mm X X
ISO B2 500 x 707 mm X X
ISO B3 353 x 500 mm X X
ISO B4 250 x 353 mm X X
ANSI A 8.5 x 11 (215.9 x
279.4 mm)
X X
ANSI B 11 x 17 in. (279.4
x 431.8 mm)
X X
ANSI C 17 x 22 in. (431.8
x 558.8 mm)
X X
ANSI D 22 x 34 in. (558.8
x 863.6 mm)
X X
ANSI E 34 x 44 in. (863.6
x 1117.6 mm)
X X
Architectural A 9 x 12 in. (228.6 x
304.8 mm)
X X
Architectural B 12 x 18 in. (304.8
x 457.2 mm)
X X
Architectural C 18 x 24 in. (457.2
x 609.6 mm)
X X
Architectural D 24 x 36 in. (609.6
x 914.4 mm)
X X
Architectural E 36 x 48 in. (914.4
x 1219.2 mm)
X X
Architectural 30" 30 x 42 in. (76.2 x
1066.8 mm)
X X