User Manual

XEROX WIDE FORMAT COPY SYSTEM Main Menu • 105
NOTE: The XXXX represents the Printer name 721
FINISHER
MODEL:
NOTE: This screen identifies the Finisher, if any. If there is no finisher,
the MODEL is displayed as NONE. If a Folder is connected, the
FINISHER screen displays the configuration of the connected Folder.
7. Press the Exit key to return to the SYSTEM DESCRIPTION
screen.
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu
displays the most recent faults related to the Scanner. Fault messages
are stored in the Controller. Each fault message contains a fault code
and a digital time stamp. When you call for service, the service center
may ask you for this information.
To display the recent fault list:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key to highlight SYSTEM INFORMATION.
3. Press the Enter key to select SYSTEM INFORMATION. The
SYSTEM INFORMATION menu screen is displayed.
4. Press the Next key to highlight RECENT FAULT LIST.
5. Press the Enter key to select RECENT FAULT LIST. The
RECENT FAULT LIST screen is displayed. Below is an example
of the RECENT FAULT LIST screen.
RECENT FAULT LIST
37449914 50000008
37449868 50000008
6. Press the Previous or Next key to scroll through the list.
7. Press the Exit key to return to the SYSTEM INFORMATION
menu screen.
RECENT FAULT LIST