Manual

8825/8830 Controller Setup Manual for Firmware 6.0 35
Accessing the Default Setup Menus (continued)
Quick Menu Item Locator
SETUP I/O PORTS MENU
SCSI
PORT ENABLE
TARGET ID
BUS TERMINATION ENABLE
ETHERTALK (for legacy 3003-XTP NIC)
PORT ENABLE
PHASE
NETBEUI (for legacy 3003-XTP NIC)
PORT ENABLE
IPX/SPX (for legacy 3003-XTP NIC)
PORT ENABLE
FRAME
NDS ENABLE
ETHERNET TCP/IP
PORT ENABLE
OFF
PRINTER
ADVANCED
TCP/IP ADDRESS
TCP/IP GATEWAY
TCP/IP MASK
DHCP ENABLE
RARP/BOOTP ENABLE
SERIAL
PORT ENABLE
BAUD RATE
300 - 19,200
FLOW CONTROL
NONE, XON/XOFF, RTS/CTS, BOTH (XON/XOFF & RTS/CTS).
PARITY
NONE, EVEN, or ODD
PARALLEL
PORT ENABLE
VPI
PORT ENABLE
TIME OUT ENABLE