Manual

8825/8830 Controller Setup Manual for Firmware 6.0 13
Controller Overview (continued)
Controller Specifications(EV4
Controller for 8825)
Physical Characteristics
The Controller is attached to the side panel of the 8825 Printer as an
embedded device.
Electrical Requirements
100 - 250 VAC auto-ranging power supply.
Agency Approvals
Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)
EMC: CE Mark, FCC Class A, Canada Radio Interference Regulations
Class A, VCCI Class 1
Hardware Specifications
CPU Power PC 8240 (603e) operating at 250 MHz clock speed.
RAM 64MB DRAM is standard. Maximum RAM is 256MB. Two DIMM
Slots accommodate 64 or 128MB, PC100, DIMMs.
Hard disk Ultra SCSI, 7200 rpm internal hard disk drive.