Instruction Manual

Loading Paper
Phaser® 8560/8860 Printer
3-14
4. Adjust the paper guides to fit the paper loaded in the tray.
5. To use the current tray setup, press the OK button on the control panel. If you load a new
paper size and type in the tray, do the following:
a. Select
Change setup, and then press the OK button.
b. Select the paper size, and then press the OK button.
c. Select the paper type, and then press the OK button.
See also:
Supported Paper Sizes and Weights for Tray 1 on page 3-6
Printing on Specialty Media on page 3-31
Printing Custom Size Paper from Tray 1 on page 3-58
8860
p
-126