User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Controlling the Quality of Your Prints
Phaser® 7760 Color Laser Printer
4-4
To select the color correction in a supported driver:
See also:
Knowledge Base at www.xerox.com/office/7760support
None Applies no color correction. Use with other color
management tools, such as ICC (International Color
Consortium) profiles, ColorSync, or the PANTONE
®
Color Chart for your printer.
Black and White Converts all colors to shades of gray.
Use Printer Control
Panel Setting
Uses the color correction set in the printer. The color
correction can be set in the printer using either the
control panel or the CentreWare software (if available).
Operating System Steps
Windows 98 SE,
Windows 2000,
Windows XP, or
Windows Server 2003
1. Select the TekColor tab.
2. Select the desired color correction. Some of the color corrections are
grouped under Office Color or Press Match.
Mac OS 9.x 1. In the Print dialog box, select General.
2. Select TekColor from the drop-down list.
3. Select the desired color correction for Color.
Mac OS X, version
10.2 and higher
1. In the Print dialog box, select Image Quality from the drop-down list.
2. Select the desired color correction from the Color Correction drop-
down list.
TekColor Correction Description