User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Choosing Output Options
Phaser® 7760 Color Laser Printer
3-52
Selecting Hole Punching from the Printer Driver
To select a hole punching option for a specific print job:
Operating System Steps
Windows 98 SE,
Windows 2000,
Windows XP,
Windows Server 2003
1. Select the Output Options tab.
2. Select the number of holes from the Hole Punching drop-down list.
3. Select Finisher Output Tray from the Paper Destination drop-down
list.
Mac OS 9 or
Mac OS X, version
10.2 and higher
1. In the Print dialog box, select Finishing Options from the drop-down
list.
2. Select the number of holes under Hole Punching.
3. Select Finisher Output Tray from the Paper Destination drop-down
list.