User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Choosing Output Options
Phaser® 7760 Color Laser Printer
3-49
Offsetting Output
When you send output to the top output tray or the finisher stacker tray, the copies or jobs can
be offset in the tray. Offsetting shifts the pages in the output tray for each job or each copy of a
collated job.
Note: If a finisher is installed, the top output tray no longer offsets.
Selecting Offsetting from the Printer Driver
To select offsetting for a specific print job:
Operating System Steps
Windows 2000,
Windows XP,
Windows Server 2003
1. Select the Layout tab.
2. Click the Advanced button.
3. Set Offset Collated Sets to On.
Mac OS 9 or
Mac OS X, version
10.2 and higher
1. In the Print dialog box, select Finishing Options from the drop-down
list.
2. Click Offset Collated Sets to select it.