User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Printing on Specialty Media
Phaser® 7760 Color Laser Printer
3-43
Printing Glossy Paper from Trays 2-5
1. Pull out the tray.
2. Fan the paper to release sheets that are stuck together.
3. Insert glossy paper with the long edge along the left side of the tray.
■ For single-sided printing, place the side to be printed faceup.
■ For automatic 2-sided printing place side one facedown.
Note: Do not load glossy paper above the transparency fill line inside the tray.
Overloading the tray may cause jams.
4. Adjust the paper guides to the size of the paper.
7760-110
7760-106
7760-112
MA
X