User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Printing on Specialty Media
Phaser® 7760 Color Laser Printer
3-39
Printing Labels from Tray 1 (MPT)
1. Open Tray 1 (MPT).
2. Load the labels in Tray 1 (MPT).
■ Insert the label sheets long-edge feed.
■ Place the labels sheets facedown.
■ Place the top of the page towards the front of the printer.
3. Adjust the paper guides to match the size of the sheets.
4. When the control panel prompts you to confirm the type and size of paper in the tray:
a. Select
Change setup, and then press the OK button.
b. Select
Labels as the paper type, and then press the OK button.
c. Select the appropriate size of the label sheets with the letters
LEF (Long-Edge Feed),
and then press the OK button.
5. In the printer driver, select Tray 1 (MPT) as the paper source and/or select Labels as the
paper type.
7760-027
7760-124