User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Loading Paper
Phaser® 7760 Color Laser Printer
3-18
Long-Edge Feed
Use long-edge feed for all paper types and sizes, except paper that is longer than 297 mm
(11.7 in.).
Note: If your printer has a finisher with a booklet maker, you must load paper short-edge feed
to print booklets; see Short-Edge Feed on page 3-21.
To load paper or other media in Trays 2-5:
1. Pull out the tray.
2. Fan the paper to release sheets that are stuck together.
3. Load the paper with the long edge towards the left side of the tray.
■ For single-sided printing, insert the side to be printed faceup, with the top of the
paper at the front of the tray. Prepunched holes should be on the right side of the tray.
7760-110
7760-106
7760-059