User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Loading Paper
Phaser® 7760 Color Laser Printer
3-16
Using Manual Feed in Tray 1 (MPT)
If you are using paper, such as letterhead, and do not want others to use it by mistake, you can
have the printer prompt you when it is time to load the paper for your print job.
Selecting Manual Feed Using Windows
To select manual feed using Windows 2000, Windows XP, or Windows Server 2003:
1. In the Windows printer driver, click the Paper/Quality tab.
2. Select Force Printing from a Specific Tray, and then select Tray 1 (MPT) from the list.
3. Select Manual Feed, and then click OK to save the driver settings.
4. Submit your print job.
5. When prompted by the control panel, remove the paper from Tray 1 (MPT).
6. Load the appropriate paper for your job into the tray.
Selecting Manual Feed Using Macintosh
To select manual feed using Macintosh:
1. In the Print dialog box, select Paper Feed from the drop-down list.
2. Select Manual Feed in the All pages from drop-down list.
3. Submit your print job.
4. When prompted by the control panel, remove the paper from Tray 1 (MPT).
5. Load the appropriate paper for your job into the tray.
See also:
Loading Paper in Tray 1 (MPT) on page 3-9